[UPDATED 2024] HP HPE6-A69 Questions Prepare with Free Demo of PDF
NEW 2024 Certification Sample Questions HPE6-A69 Dumps & Practice Exam
HP HPE6-A69 certification exam is an ideal certification for IT professionals who work with Aruba switching solutions. It is designed to test the candidate's knowledge and skills in various areas related to Aruba switching technologies. With this certification, professionals can demonstrate their expertise in designing and implementing complex Aruba switching solutions, making them highly valuable to organizations that use these solutions. Additionally, this certification can open up new career opportunities for IT professionals and enable them to advance their careers in the IT industry.
NEW QUESTION # 30
The customer is already using Aruba Gateway and third-party L2 switches New ArubaOS CX 6300 switches have been deployed for R&D. which have a requirement for user profiling and tunneled traffic between ArubaOS CX 6300 and Aruba Gateway What is required for this configuration to apply QoS user-based rules for the R&D client traffic?
- A. Manually prioritize IP protocol 47 traffic on the third-party switches to prioritize the tunneled traffic
- B. Apply a QoS rule to the ArubaCX 6300 client port, lo classify traffic before it is tunneled.
- C. Apply a port-access policy with QoS defined in the user role on the ArubaOS CX6300 switch
- D. Create a QoS policy for the UBT-client-VLAN traffic on the third-party switch.
Answer: B
NEW QUESTION # 31
When planning a new wired network solution for an organization, mere are technical goals that must be achieved to support the organization objectives and their applications and services.
Which options are valid technical goals? (Select two.)
- A. Accelerate the ordering process of new network hardware.
- B. improve the network throughput
- C. Transform the process of acquisition of a new network solution from a CAPEX to an OPEX model
- D. Replace hardware that is reaching end of support with a technology refresh.
- E. Reduce the cost of wiring.
Answer: A,C
NEW QUESTION # 32
The customer is considering Implemented the following VSX configuration that will host an Aruba mobility cluster servicing 9000 dual stack employee devices.
The client's default gateways will be hosted on the VSX stack. The customer is seeking advice about how to ensure ArubaOS-CX VSX best practices have been applied.
What advice can you offer the customer? (Select two)
- A. The Keepalive interface should be changed to interface LAG2 so there is redundancy through the mobility cluster.
- B. The keepalive subnet is misconfigured, it has an inappropriate address on Agg-1.
- C. The ISL Bandwidth should be upgraded
- D. The vsx linkup-delay timer is unnecessarily high; it should be reduced to prevent excessive delay of packet forwarding when a VSX peer joins an existing master.
- E. The -system-mac' of Agg-1 should be changed to an unused address from the unicast private address range
- F. Agg-1 and Agg-2's hardware forwarding table profile should be changed to "L3-agg''.
Answer: B,F
NEW QUESTION # 33
ArubaOS-CX 8325 VSX configuration has a Tailed ISL link between the switches with keepalive status established. While troubleshooting the condition, what is the expected behavior of the VSX traffic flow in the current condition?
- A. VSX peer is seen as down
- B. VSX nodes Keep forwarding traffic over its interfaces
- C. VSX tables are out of sync
- D. VSX protection state is OK
- E. vsx tables are n sync
Answer: B
NEW QUESTION # 34
Refer to the exhibit.
A customer has implemented this ArubaOS-CX solution. NetEdit is not present. After a while, the secondary node of the VSX-cluster fails. What is the correct procedure to replace the failed node as quickly as possible?
- A. Replace the failed unit, connect the correct cables, boot up the new node and wait for VSX to synchronize configuration and firmware.
- B. Replace the failed unit, connect the correct cables, boot up the new node in recovery mode, upgrade firmware and restore, and save config Then, reboot and wait for VSX to synchronize.
- C. Replace the failed unit, boot up the new node without connecting cables, upgrade firmware, and restore and save config Shutdown all ports, reconnect the correct cables, and enable all ports
- D. Replace the failed unit, boot up the new node without connecting cables, upgrade firmware and configure as secondary vsx node connect iSl and wart for VSX to synchronize After successful recovery, reconnect the remaining cables.
Answer: D
NEW QUESTION # 35
A customer with an ArubaOS-CX 6300M switch is having a performance issue on the network and has received complaints about users experiencing intermittent connectivity. After performing troubleshooting it is determined that many of the local websites on the LAN that users are unable to reach are resolved to an invalid MAC address What are the minimum steps that should be performed to mitigate this condition? (Select two.)
- A. implement dhcpv4-shooping.
- B. Enable 'arp inspection untrusted' on the end-user physical ports
- C. Implement ARP ACLs to define trusted MAC address to IP bindings
- D. Enable 'arp inspection' on the end-user VLAN
- E. Enable 'arp inspection' on the end-user physical ports
Answer: C,D
NEW QUESTION # 36
An administrator has identified a denial of service attack that is stressing the management processor on the switch. Which actions can be applied to CoPP to mitigate the issue? (Select two.)
- A. Set the processing priority
- B. Create a policy that matches the payload of GRE traffic.
- C. Regulate traffic from the OOBM Ethernet port
- D. Apply multiple active polices for the classes of traffic
Answer: C,D
NEW QUESTION # 37
What are two valid steps in a Proof of Concept plan? (Select two)
- A. Development of the items to Be tested
- B. Engineering a proposed solution
- C. Definition of success criteria
- D. Acceptance of the proposed solution
Answer: A,C
NEW QUESTION # 38
Company A and Company B are merging their BGP routed networks The companies have overlapping IP ranges and security concerns during the migration phase. Which Aruba CX 8325 functionality would help the merging of networks in a secure way?
- A. Use of virtual route forwarding and BGP route leaking
- B. Use of Aruba Gateway appliance to control the routes between merged networks
- C. Use of ACL's to separate the company networks at the VLAN level
- D. Use of vsf capable switch to integrate the routing
Answer: B
NEW QUESTION # 39
A customer would like to utilize some ArubaOS-CX 6300F switches to perform OSPF routing.
With the ports set up as routed ports, and default parameters for OSPF, which action is the simplest way to allow the fastest communication...
- A. No action is required
- B. Utilize Equal-cost multi-path routing to aggregate more bandwidth on the WAN.
- C. Set the OSPF cost parameters on every interface on every switch according to the Bandwidth or each link
- D. Set the OSPF reference bandwidth to 10 or higher
Answer: A
NEW QUESTION # 40
The rate-limiting QoS feature can be implemented on all ArubaOS-CX platforms However, some features are platform dependent. Which statements are true'' (Select two.)
- A. Broadcast-rate limiting is supported on all ArubaOS-CX platforms
- B. ICMP-Rate limiting is supported on all ArubaOS-CX platforms.
- C. Unknown unicast rate limiting is supported on all ArubaOS-CX platforms
- D. Multicast and broadcast rate limits cannot be applied at the same time on the same Interface
Answer: B,D
NEW QUESTION # 41
Refer to the exhibit.
Aruba CX 6300 switch has routes in three different VRFs as per the example above. The user needs to leak routes between VRF Secure and VRF Dev. and also between VRF default and VRF Dev The customer Is not able to establish routing between directly connected networks 10.100.50.0/24 and
10.102.26.0/24 Which statement is true regarding the routing troubleshooting?
- A. Route leaking is supported between non-default VRFs only
- B. Route leaking between default and non-default VRFs is supported with Aruba CX 8400.
- C. Multi-protocol BGP routing needs to be defined for route leaking
- D. Route Distinguisher needs to be set to 1 for default VRF.
Answer: C
NEW QUESTION # 42
A customer wants to implement a new Aruba 6300M 48-port iGbE Class 4 PoE and d-port SFP56 Switch solution. The customer wants to automatically provision devices, connected to the switch with correct settings.
VoIP phones need to be placed in VLAN 10, send out traffic with a VLAN tag. The phone is LLDP-MED capable How can you accomplish this with the least amount of administrative effort?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: B
NEW QUESTION # 43
Which statement is true about NAE scripts'?
- A. The System Resource Monitor and Health Monitor a/e the only scripts installed on the system by default
- B. No script is installed on the system by default.
- C. The Health Monitor is the only script installed on the system by default.
- D. The System Resource Monitor is the only script Installed on the system by default.
Answer: D
NEW QUESTION # 44
With the given access-list:
Which statement is true about hardware resource consumption of this ACL?
- A. The ACL consumes a total of 4 entries.
- B. The ACL consumes a total of 8 entries.
- C. The ACL consumes a total of 6 entries.
- D. The ACL consumes a total of 2 entries
Answer: C
NEW QUESTION # 45
When an ArubaOS-CX switch uses the temporary copy of the coring state database, how does NetEdit validate if the configuration is correct?
- A. Planned validation
- B. Semantic validation
- C. Syntax validation
- D. Deploy validation
Answer: A
NEW QUESTION # 46
......
HPE6-A69 Deluxe Study Guide with Online Test Engine: https://pass4lead.newpassleader.com/HP/HPE6-A69-exam-preparation-materials.html