Get Latest [Feb-2023] Conduct effective penetration tests using NewPassLeader 350-801
Penetration testers simulate 350-801 exam PDF
Understanding functional and technical aspects of Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) Cisco IOS XE gateway and media resources
The following will be discussed in CISCO 350-801 exam dumps:
- Defining QoS and QoS Models
- Identify the appropriate media resources for a given scenario (hardware and software)
- Describing Collaboration Edge Architecture
- Configure and verify the MGCP
- Configure these voice gateway elements
- Configuring Classification and Marking on Cisco Catalyst Switches
- Dial peers
- Implementing Classification and Marking
- Configure ISDN PRI/BRI
- Configuring Cisco Unity Connection Integration
- Voice translation rules and profiles
- Configuring Cisco Unity Connection Call Handlers
- Codec preference list
NEW QUESTION 104
Which protocol does prime collaboration Assurance use to poll the health status of different systems in the collaboration environment?
- A. SIP
- B. SMTP
- C. SNMP
- D. SCCP
Answer: C
NEW QUESTION 105
Which command must be defined before an administrator changes the linecode value on an ISDN T1 PRI in slot 0/2 on an IOS-XE gateway?
- A. isdn incoming-voice voice
- B. voice-port 0/2/0:23
- C. pri-group timeslots 1-24
- D. card type t1 0 2
Answer: D
NEW QUESTION 106
Which method is user to avoid toll fraud with Cisco Unified Communications Manager calls?
- A. Call policy service
- B. class of service
- C. Default zone access rules
- D. TOLLFRAUD_APP
Answer: B
NEW QUESTION 107
Refer to the exhibit. What is the registration state of the analog port in this debug output?
- A. The MGCP Gateway is not communicating with the Cisco UCM.
- B. The analog port failed to register to Cisco UCM with an error code 200.
- C. The analog port is registered to Cisco UCM.
- D. The analog port is currently shut down.
Answer: C
NEW QUESTION 108
According to the QoS Baseline Model, drag and drop the applications form the left onto the correct per-Hop Behaviour values on the right.
Answer:
Explanation:
NEW QUESTION 109
Multiple router patterns match a number. How does Cisco Unified Communications Manager determine which pattern to use?
- A. the one with the closed match
- B. the one with the longest match
- C. the one that comes first in numerical order
- D. the one that discards everything PreDot
Answer: A
NEW QUESTION 110
In the cisco expressway solution, which two features does mobile and Remote access provide? (Choose two)
- A. the ability to register third-party SIP or H.323 devices on Cisco UCM without requiring VPN
- B. the ability for remote users and their devices to access and consume enterprise collaboration applications and services
- C. the ability of Cisco IP Phones to access the enterprise through VPN connection
- D. Secure reverse proxy firewall travelsal connectivity
- E. VPN-based enterprise access for a subset of Cisco Unified IP Phone models
Answer: B,D
NEW QUESTION 111
According to the QoS Baseline Model, drag and drop the applications form the left onto the correct per-Hop Behaviour values on the right.
Answer:
Explanation:
Explanation
Voice = EF
Interactive Video = AF41
Bulk Data = AF11
Call-Signaling = AF31/CS3
Network Management = CS2
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoS-SRND-Book/Qo
NEW QUESTION 112
Which program is required to deploy the Cisco Jabbar client on an on-premises Cisco collaboration solution?
- A. Cisco UCM IM and Presence
- B. Cisco UCM
- C. Cisco Expressway-C
- D. Cisco Unity Connection
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/14_0/cjab_b_deploy-jabber-on- premises-14_0/cjab_b_deploy-jabber-on-premises-129_chapter_010000.html
NEW QUESTION 113
Refer to the exhibit.
A collaboration engineer adds a redundant NTP server to an existing Cisco Collaboration solution On the Cisco UCM OS Administration page the new NTP server shows as "Not Accessible" Which action resolves this issue?
- A. Restart NTPD on the Cisco UCM server
- B. Delete and re-add the new NTP server via the Cisco UCM command-line interface
- C. Configure the "reach" value as "377" for the new NTP server
- D. Start the NTP service on the new NTP server
Answer: B
NEW QUESTION 114 
Refer to the exhibit. Endpoint A calls endpoint
B. What is the only audio codec that can be used for the call?
- A. PCMA/8000
- B. G7221/16000
- C. G722/8000
- D. Telephone-event/8000
Answer: B
NEW QUESTION 115
An administrator recently upgraded a Cisco Webex DX80 through its web interface but discovered the next morning that the unit has received to its previous version. What must the administrator do to prevent this from happening again?
- A. Assign a phone security profile with secure SIP.
- B. Set the prepare cluster for rollback to pre-8.0 enterprise parameter to true.
- C. Confirm the phone load name in the phone configuration.
- D. Assign a universal device template to the phone.
Answer: C
Explanation:
Section: Infrastructure and Design
NEW QUESTION 116
Which filed id configured to change the caller ID information on a SIP route pattern?
- A. Called party Transformation Mask
- B. Calling party transformation Mask
- C. Connected Line ID Presentation
- D. Route partition
Answer: B
NEW QUESTION 117
Which attribute contains an XMPP stanza?
- A. presence
- B. iq
- C. type
- D. message
Answer: C
NEW QUESTION 118
On a cisco catalyst switch which command is required to send CDP packets on a switch port that configures a cisco IP phone to transmit voice traffic in 802.1q frames tagged with the voice VLAN ID 221?
- A. Device(config-if)# switchport voice vlan 221
- B. Device(config~if)# switchport trunk allowed vlan 221
- C. Device(config-if)# switchport access vlan 221
- D. Device(config-if)# switchport vlan voice 221
Answer: A
NEW QUESTION 119
A user reports that when receiving an inbound call on their IP Phone from the PSTN they are unable to transfer this call to another PSTN number What is the reason for this failure?
- A. The service parameter related to Öffnet to Offnet Call Transfer is set to TRUE
- B. The IP phone is configured with the wrong region
- C. The incoming calling search space of the SIP trunk does not include the partition of the line in the IP phone
- D. The gateway is configured with the wrong device pool
Answer: A
NEW QUESTION 120
An end user at a remote site is trying to initiate an Ad Hoc conference call to an end user at the main site. The conference receives an error message on the phone:
Cannot complete conference call.
What is the cause of the issue?
- A. A software conference bridge is not assigned.
- B. The transcoder resource Is missing.
- C. The remote phone does not have the conference feature assigned
- D. A Media Termination Point is missing.
Answer: B
NEW QUESTION 121
......
Tested Material Used To 350-801 Test Engine: https://pass4lead.newpassleader.com/Cisco/350-801-exam-preparation-materials.html