[Dec-2021] 4A0-113 Certification with Actual Questions from NewPassLeader
Updated 4A0-113 Dumps PDF - 4A0-113 Real Valid Brain Dumps With 105 Questions!
NEW QUESTION 54
A default route for a client is also known as the:
- A. Proxy ARP
- B. Default gateway
- C. Default path
- D. Gateway path
Answer: B
NEW QUESTION 55
Which of the following commands can be used to display the number of SPF computations that have been performed on a router?
- A. show router ospf interface
- B. show router ospf area <area-id>
- C. show router ospf neighbor
- D. show router ospf status
Answer: B
NEW QUESTION 56
Which one of the commands below will create a static route to network 2.3.4.0/24 on the AlcatelLucent 7750 SR router?
- A. Static route 2.3.4.0 255.255.255.0 next hop 3.4.5.6
- B. Static-route next-hop 3.4.5.6 2.3.4.0/24
- C. Static route 2.3.4.0/24 next hop 3.4.5.6
- D. Static-route 2.3.4.0/24 next-hop 3.4.5.6
Answer: D
NEW QUESTION 57
Which of the following are similarities between OSPF and IS-IS? Choose two answers.
- A. Metric is based on hop count.
- B. Support hierarchy through the use of areas.
- C. Slow convergence after link failures.
- D. Support for CIDR.
- E. Link state updates sent using layer 3 multicast.
Answer: B,D
NEW QUESTION 58
Which LSA type is not found in point-to-point only OSPF networks?
- A. Type 1 Router LSA
- B. Type 3 Summary LSA
- C. Type 2 Network LS A
- D. Type 5 External LSA
Answer: C
NEW QUESTION 59
Which of the following statements regarding the election of the designated router (DR) by OSPF routers are true? (Choose two)
- A. The router with the lowest priority is the DR.
- B. The router with the highest priority is the DR.
- C. If priorities are the same, the DR is chosen based on the highest RID.
- D. If priorities are the same, the DR is chosen based on the lowest RID.
Answer: B,C
NEW QUESTION 60
Which of the following statements apply to link state protocol behavior? Choose three answers.
- A. An adjacency database is maintained by each router.
- B. Routers broadcast the entire route table to all neighbors.
- C. The sequence number for an update is incremented as it is flooded from router to router.
- D. The topological database is the same for all routers in a single area.
- E. Information about directly connected links is sent to all neighbors.
Answer: A,D,E
NEW QUESTION 61
In an OSPF Hello packet, which of the following fields must match for all neighbor routers on the segment? Choose three answers.
- A. Checksum values
- B. The list of neighbors
- C. Stub flag
- D. Hello and Dead intervals PC.
- E. Area ID W B.
Answer: C,D,E
NEW QUESTION 62
Click on the exhibit.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. There are no stub or NSSA areas. Which of the following regarding LSAs is TRUE?
- A. Router R2 will receive Type 5 and Type 7 LSAs.
- B. Router R3 will advertise Type 7 LSAs to Area 0 and Area 2.
- C. Only routers R2 and R3 receive Type 5 LSAs advertised by router R1.
- D. Router R7 will receive Type 5 LSAs advertised by router R1.
Answer: D
NEW QUESTION 63
What is the default inbound metric for RIP on the Nokia 7750 SR?
- A. A value of 1.
- B. Whatever the advertised metric happens to be.
- C. This must be administratively set as there is no default value.
- D. A value of 15.
Answer: A
NEW QUESTION 64
What is the metric and maximum routable value for RIP?
- A. Link cost and 15
- B. Hop count and 16
- C. Hop count and 15
- D. Link cost and 16
Answer: C
NEW QUESTION 65
Which of the following correctly lists the 5 OSPF packet types?
- A. Hello, link state refresh, link state update, link state acknowledgement, link state authentication.
- B. Hello, link state update, link state request, link state acknowledgement, database description.
- C. Hello, link state update, link state packet, link State acknowledgement, database description.
- D. Link state update, link state refresh, link state acknowledgement, database description, notification.
Answer: B
NEW QUESTION 66
Which of the following statements concerning OSPFv3 is false?
- A. MD5 Authentication is not supported.
- B. Router LSAs do not carry IPv6 prefix information
- C. NSSA is not supported in OSPFv3.
- D. OSPFv3 uses a 32-bit router ID.
Answer: C
NEW QUESTION 67
Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. How many type 4 LSAs will be present in the network?
- A. Type 4 LSAs are not generated in this network topology.
- B. One for each of the routers in area 0
- C. One.
- D. One for each of the external routes exported by router R1.
Answer: A
NEW QUESTION 68
How many databases does a Link State routing protocol use?
- A. Three
- B. Four
- C. Two
- D. One
Answer: A
NEW QUESTION 69
Which of the following statements describe the major features of OSPF? Choose two answers.
- A. Fast reroute capability
- B. Cut through forwarding
- C. Route redistribution
- D. Control traffic prioritization
- E. Traffic engineering extensions
Answer: C,E
NEW QUESTION 70
What causes an adjacency to change from "Init" to "Two Way"?
- A. When OSPF neighbors exchange Database Descriptor packets
- B. When a router receives a Hello packet from a neighbor that contains its router id in the neighbor list
- C. When a Link State Acknowledgement is received in response to a Link State Update
- D. When a Link State Update is received in response to a Link State Request
Answer: B
NEW QUESTION 71
What must be configured on the Nokia 7750 SR for RIP to advertise locally attached links?
- A. A group and neighbor statement for each peer
- B. A policy statement within the router identifying what is to be advertised
- C. Access-lists denoting what is to be advertised
- D. Default metrics for each link
Answer: B
NEW QUESTION 72
......
Nokia 4A0-113 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
Pass Your 4A0-113 Exam Easily With 100% Exam Passing Guarantee: https://pass4lead.newpassleader.com/Nokia/4A0-113-exam-preparation-materials.html